Skip to content
The award winning Charcoal & Smoking Specialists 50,000+ Likes!
Call 1300 EATBBQ 1300 328 227

BGE - High Temp Gasket Kit MX,M
CA0125

$50.00
8 in stock

Description

High-Performance Gasket Kits

The heat sealing gasket material installed on a Big Green Egg is designed to last for years under normal operating conditions. However, if the felt gasket shows signs of excessive wear or deterioration, it can easily be replaced using the new Big Green Egg High Performance Gasket Kit.


Gasket Replacement Kit for Medium, Small, MiniMax and Small EGG – 113733



Replacing the Gasket

The heat sealing gasket material installed on your Big Green Egg® is designed to last for years under normal

operating conditions. If the gasket shows signs of excessive wear or deterioration, it can be easily replaced

using a Genuine Big Green Egg High Performance Gasket Kit.

INSTRUCTIONS

• Make sure the EGG is completely cool. Change gasket only in a dry, well-ventilated location. Please

take safety precautions and use protective gloves and eyewear.

• Begin by slightly moistening the old gasket material with acetone or isopropyl alcohol. Completely

remove the old gasket with a flat-edged scraper, and then clean the rim of the base and lid with

acetone or isopropyl alcohol to remove any gasket or adhesive residue (caution should be taken to

avoid damage to the ceramic surface). Do not use common household adhesive removers as they can

leave a residue on the ceramic surface.

• Allow ceramic to dry for at least 30 minutes; the surface must be clean and dry for the new gasket to

adhere. The new gasket is self-adhesive, provided that you have properly removed the old gasket and

cleaned the surface as instructed.

• Simply remove the backing from the gasket, taking care not to touch the adhesive side, and press

firmly down onto the rim. Carefully curve or bend the gasket material around the rim as you press

down, being careful not to let the gasket material hang over the inside edge. Do not pull or attempt to

stretch the gasket; there is ample material for the top and bottom rim of your EGG. Trim any excess

length as needed.

• Before using EGG, please allow gasket to cure for 24 hours in a dry location with the lid closed. To

improve longevity, keep gasket clean of grease and oils.

CAUTION - Only replace the gasket on a completely cooled and dry Big Green Egg. Wear protective eyewear

and gloves when handling acetone or isopropyl alcohol; work only in a well-ventilated area, and do not use

these products while smoking, near an open flame or near any source of ignition.

Reviews

This product has not yet been reviewed

Also bought items

FERRABOLI Marsupio Piccolo Freestanding Charcoal BBQ. Multi-level grill in chrome 46x27cm FERRABOLI Marsupio Piccolo Freestanding Charcoal BBQ. Multi-level grill in chrome 46x27cm
$139.00
15 in stock

COMPACT SIZED CHARCOAL BBQ

Made to European standards, this imported charcoal BBQ by FERRABOLI ITALY is compact and easy to use.


Lighting charcoal in this BBQ is as simple as placing 2 or 3 hand fulls of natural wood charcoal in the the tray to cover

Family BBQ Shichirin (S) 36.5 x21.5 x 21 Family BBQ Shichirin (S) 36.5 x21.5 x 21
$75.00
6 in stock

Japanese Shichirin Charcoal BBQ

Imported from Japan this metal charcoal

PICNIC portable charcoal BBQ - 40x30x11cm travel case PICNIC portable charcoal BBQ - 40x30x11cm travel case
$70.00
94 in stock

No nuts or bolts - with minimal parts which all folds out and slots in quickly


Take anywhere design.... for the park, camping trip or just for home when you feel like cooking over charcoal!


Setup is easy - fold out the tube legs, unclip

ProQ Rib Racks ProQ Rib Racks
$20.00
2 in stock

The ProQ Rib/Fish Rack increases the cooking capacity of your Smoker and allows smoke to flow all over the meat/fish thus increasing the smoke penetration. The End spikes are great for holding corn or potatoes! Get more racks of ribs, or fish onto your BBQ!


The Chrome plated steel rack triples

Fat Boy Injector - holds 60ml Fat Boy Injector - holds 60ml
$40.00
38 in stock

FAT BOY BBQ MARINADE INJECTOR


Add flavor and moisture from the inside

6cm long needle point Injector



Next BBQ, Add Brine or Marinade to the Inside of your Meats


Hello,

We are very sorry, but the browser you are visting us with is outdated and not complient with our website security.

Please upgrade your browser to a modern secure version to view our website.

High-Performance Gasket Kits

The heat sealing gasket material installed on a Big Green Egg is designed to last for years under normal operating conditions. However, if the felt gasket shows signs of excessive wear or deterioration, it can easily be replaced using the new Big Green Egg High Performance Gasket Kit.


Gasket Replacement Kit for Medium, Small, MiniMax and Small EGG – 113733



Replacing the Gasket

The heat sealing gasket material installed on your Big Green Egg® is designed to last for years under normal

operating conditions. If the gasket shows signs of excessive wear or deterioration, it can be easily replaced

using a Genuine Big Green Egg High Performance Gasket Kit.

INSTRUCTIONS

• Make sure the EGG is completely cool. Change gasket only in a dry, well-ventilated location. Please

take safety precautions and use protective gloves and eyewear.

• Begin by slightly moistening the old gasket material with acetone or isopropyl alcohol. Completely

remove the old gasket with a flat-edged scraper, and then clean the rim of the base and lid with

acetone or isopropyl alcohol to remove any gasket or adhesive residue (caution should be taken to

avoid damage to the ceramic surface). Do not use common household adhesive removers as they can

leave a residue on the ceramic surface.

• Allow ceramic to dry for at least 30 minutes; the surface must be clean and dry for the new gasket to

adhere. The new gasket is self-adhesive, provided that you have properly removed the old gasket and

cleaned the surface as instructed.

• Simply remove the backing from the gasket, taking care not to touch the adhesive side, and press

firmly down onto the rim. Carefully curve or bend the gasket material around the rim as you press

down, being careful not to let the gasket material hang over the inside edge. Do not pull or attempt to

stretch the gasket; there is ample material for the top and bottom rim of your EGG. Trim any excess

length as needed.

• Before using EGG, please allow gasket to cure for 24 hours in a dry location with the lid closed. To

improve longevity, keep gasket clean of grease and oils.

CAUTION - Only replace the gasket on a completely cooled and dry Big Green Egg. Wear protective eyewear

and gloves when handling acetone or isopropyl alcohol; work only in a well-ventilated area, and do not use

these products while smoking, near an open flame or near any source of ignition.