Prongs, Ties and Brackets

Stainless Steel Fork Prong to secure whole animal on spit rod 21mm dia with screw Length of fork is 14cm long Only 1

Stainless Steel Leg Ties 21mm Dia with screw lock Measures 30cm across. Gap for shanks is 35mm

Stainless Steel U bolt strap to attach spine to spit rod. 15cm long with pointed threaded tips with wing nuts. Gap is 6cm wide.

Counter Balance for 8mm spit rod. Helps prevent motor damage when meat can not be evenly skewered on a spit rod. Helps stop sudden weight shifts that can tear the gear teeth in your rotissierie motor. Weight approximattelly 0.45kg can be use on opposite heavy side on spiy rod as counter balance.

Rotisserie FORK double sided. 11mm Dia rod hole with thumb screw tightener for 8mm rotissierie rod. Long fork prong 10cm / Short fork prong 7cm. Total length 23cm./ approx 6.5cm width Use to secure 2 cuts of meat on each side. Made of Chrome.

Set of 2 - Stainless Steel Spit Roaster Souvlaki Gyros Discs - 22mm Round Collar assists in affixing gyros onto your spit rod. Simply skewer the meat, slide and secure the discs into place at each end and cook away. Features: 22mm round collar diameter Suitable for round skewers upto 22mm Suitable for square skewers upto 16mm 1mm thick 304 Grade Stainless Steel Dimensions:Diameter: 15cm

Chrome Rotisserie Prong pair set. 11mm rotisserie rod hole wuth thumb screw for tightening - for 8mm rod. Long prong 10cm / short prong 7cm. Flat cut tips.

Stainless Steel 4 Prong rotisserie meat holder. 11mm Dia hole with Thumb Screw Prong length approx 8.5cm and 9cm Long Price is for a set of 2 Prongs

Set of 2 Stainless Steel Rotisserie Prong 12mm rotisserie rod hole wuth thumb screw for tightening - for 8mm rod. Long prong 9cm / short prong 8cm

18cm long forks with square 12mm hole with wing nut screw. Set of 2 forks

Stainless Steel Rotisserie Prong sold individually. 11mm rotisserie rod hole wuth thumb screw for tightening - for 8mm rod. Long prong 9cm / short prong 8cm

Stainless Steel Rotisserie Prong sold individually. 12mm rotisserie rod hole wuth thumb screw for tightening - for 8mm rod. Long prong 9cm / short prong 8cm

Pair of small double flat prongs in stainless steel for holding small birds and or cubes of meat on skewer or rod.. 7cm long prongs. 0.8cm wide flat with points. Gap point to point is 6.8cm Attach to skewer through 1cm x 1cm hole with screw down, wing bolt to secure. Will hold on 0.5 x 0.5cm square or flat 1cm wide skewers... up to 0.8 x0.8cm standard rotissery spit rods.

Chrome Rotisserie Prong pair set - THIN / Small. . Best for chickens or small roasts. 11mm rotisserie rod hole wuth thumb screw for tightening - for 8mm rod. Prong lenght 6.5cm all four.

Chrome Prongs with larg hole dia 15.6mm Length of spikes 90mm/75mm

Stainless Steel Spit Prongs - Double point • Set of 2 - Heavy Duty • 22mm Round Shaft Collar • 123mm x 230mm long Prongs • 8mm thick 304 food grade stainless steel Part No. LSP22R

Gyros Plates - set of 2 disks The plates are used to "squeeze" meats between the two disks on your rotisserie shaft, making it easier to carve the meat off the shaft without prongs or spikes in the way. Stainless steel with 10.5mm square collar Adjustable wing bolt for 8mm spit shafts 150mm Diameter Disks in 1mm thickness Made in 304 food grade stainless steel.

Gyros Plates - set of 2 disks The plates are used to "squeeze" meats between the two disks on your rotisserie shaft, making it easier to carve the meat off the shaft without prongs or spikes in the way. Stainless steel with 20mm square collar Adjustable wing bolt for smaller spit shafts 150mm Diameter Disks in 1mm thickness Made in 304 food grade stainless steel.